NT32AE2

HITACHI NT32AE2

Description
• Light Weight at only 2 lbs the NT32AE2 is light and well balanced, for less user fatigue
• Selective Actuation with a simple flip of the switch allows for either sequential or “bump fire” nailing. No additional parts or tools required.
• Tool-Free Depth Adjustment provides simplicity and flexibility when fastening various types of wood
• 360 Degree Fully Adjustable Exhaust directs air exhaust away from the user
• Smallest Nailer in its’s Class at only 10” long and 7-3/4” high making this easier to fit into tight areas
• No-mar tip protects the work surface from damage

Specifications
Actual weight (lbs.): 2.0
Length (in.): 10
Height (in.): 7-3/4
Air pressure (PSI): 70-120
Nail range (in.): 5/8 - 1-1/4
Nail capacity (Nails): 100
Magazine type: Side loading
Firing mode: Single/ Contact selector
No mar tip: Yes
Depth adjustment: Yes (Dial)
Adjustable exhaust port: Yes (Top)
Jam clearing: Yes (Front lever)
Oil-free engine: No
Material of body: Aluminum
Rubber Grip: Yes
Fastener Type: 18-Gauge Brad

NT50AE2

HITACHI NT50AE2

Description
• NT50AE2 accepts 5/8" to 2" 18-gauge fasteners
• New selective actuation switch lets the user easily select bump fire or sequential fire modes
• At only 2.2 lbs, it is well balanced and lightweight to make finish work a breeze
• Elastomer grip adds comfort while preventing slippage
• Visual nail reload indicator located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided
• Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use
• Engineered with the safety behind the narrow nosepiece and short center height to allow for nail placement in hard to reach areas and corners
• Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• No-mar tip on the nose protects the work piece from markings
• 360 degree adjustable exhaust port keeps dust, debris and oil off the finish project
• Lightweight aluminium body and composite magazine provide for a tool that reduces user fatigue

Specifications
Exhaust Muffler: No
Belt Hook: No
Body Type: Aluminum
Magazine Type: Composite
Weight: 2.2 lbs
Dimensions (LxH): 10" x 9-1/4"
Operating Pressure: 70 to 120 psi
Nail Range: 5/8" to 2"
Nail Capacity: 100 Nails
Magazine: Side Load
Driving Power: 1
Center Height: 7mm (.276")
Firing Mode: Single/Contact
Depth Adjustment: Yes (horizontal dial)
Adjustable Exhaust Port: Yes (top)
Jam Clearing Mechanism: Yes (front lever)

NT65A3

HITACHI NT65A3

Description
• 4.4lbs, lightweight and well balanced for easy maneuverability
• Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
• Tool-less clogged nail release mechanism for greater ease of use
• Reduced distance between driving hole and nail, for minimal nail jams
• Long-lasting rubber grip, for added comfort

Specifications
Magazine Capacity: 150
Magazine Loading: Top
Air Inlet: 3/8"
Operating Pressure: 70-120psi
Jam Clearing: Tool-Less
Depth Setting: N/A
Actuation: Selective(Sequential/Bump Fire)
L x W x H: 14-21/32" x 3" x 10"
Tool Weight: 4.4lbs
Fastener Type: 16-Gauge Finish
Magazine Angle: Straight
Fastener Length Capacity: 1.5"? 2-1/2"
Fastener Diameter Range: 16-Gauge

NT65MA2

HITACHI NT65MA2

Description
• 4.4lbs, lightweight and well balanced for easy manoeuvrability
• Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
• Tool-less clogged nail release mechanism for greater ease of use
• Depth of drive adjustment, to countersink or flush drive nails
• Unique air duster, clears debris before material installation
• Adjustable air deflector, directs the air exhaust in any direction
• Long-lasting rubber grip, for added comfort

Specifications
Actuation: Selective (Sequential/Bump Fire)
Air Consumption: .042(FT3/Cycle@100psi)
L x W x H: 13-17/32" x 3-7/32" x 11-31/32"
Tool Weight: 4.4lbs
Fastener Type: 15-Gauge Finish
Magazine Angle: 34-Degrees
Fastener Length Capacity: 2-1/2"
Fastener Diameter Range: 15-Gauge
Magazine Capacity: 100
Magazine Loading: Rear
Air Inlet: 3/8"
Operating Pressure: 70-120psi
Exhaust Deflector: 360-Degree Adjustable
Jam Clearing: Tool-Less
Depth Setting: Tool-Less