EC12

HITACHI EC12

Description
• 4.0cfm at 90psi for multiple operations
• Direct drive electric motor provides durability and long life
• Line regulator with gauge for immediate use at worksite
• O-ring on drain-cock makes valve easy to open and close
• Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers
• All metal inner construction and fan to withstand rugged use
• Oil lubricated pump improves efficiency and ensures smooth use

Specifications
Power Output: 2hp
Amps: 14.5
Rpm: 3,450
Air Displacement: 4.0cfm @ 90psi
Start/Stop Control: 100/125psi
Tank Capacity: 4.0 gal
Weight: 60lbs
Lubrication: Oil
Recovery Time: 14-sec

EC79

HITACHI EC79

Description
• Contractor grade induction motor for extended life is dramatically quieter than competitive universal motor models
• Oil free pump provides minimal maintenance and worry free finish applications
• Pancake design makes the EC79 compact and easy to transport
• The well positioned carrying handle on top makes this unit highly portable and convenient to use
• 2 Peak HP/1 Run HP compressor runs on standard household current drawing only 13 Amps
• 6-gallon tank provides reserve of air supply
• 2.7 cfm at 90 psi makes the EC79 capable of accomplishing short burst applications with tools like finish nailers and staplers
• Integrated control panel protects all components from damage
• Complete shrouding provides extra protection against damage during transport, while protecting the end user from hot surfaces
• Easy to use drain ball valves

Specifications
Run HP: 1
Peak HP: 2
Power Supply: 120V/60Hz
Rated Amps: 13
Air Delivery @ 40psi: 5.3 cfm
Air Delivery @ 90psi: 2.7 cfm
Max Pressure: 135 psi
Pressure Switch ON: 105 psi
Pressure Switch OFF: 135 psi
Tank Capacity: 6-gallon
Pump Type: Oil Free
Weight: 60 lbs

EC119

HITACHI EC119

Description
• Powerful 15 Amp induction motor for quiet operation and extended use as compared to universal motor products
• Contractor preferred 4-gallon twin stack features a large finned head pump and metal cooling fan to keep the pump cool during tough applications
• Oil lubricated pump utilizes oversized bearings for quiet and dependable service
• Produces 5.3 cfm @ 40psi and 4 cfm @ 100psi
• Locking regulator and 105 on/135 off psi means no worries about pressure wander or pressure starved tools on the job
• Unique roll cage design protects the pump and motor from damage
• Custom integrated control panel protects the gauge, regulator and plumbing, while centralizing controls for ease of use
• Convenient features include easy to use drain ball valves, a cord wrap that secures the cord when not in use, a protected pressure switch, shock absorbing feet, manual overload protection, two handed handle for manageability and two factory installed couplers ready for plug and play functionality
• Lightweight at just 63.7 lbs

Specifications
Horse Power: 1.6 HP
Amps: 15
RPM: 3,450
Air Delivery: 5.3 cfm @ 40 psi & 4.0 cfm @ 100 psi
Start/Stop Control: 1-5/135 psi
Max Working Pressure: 135 psi
Tank Capacity: 4.0 gallons
Lubrication: Oil
Recovery Time: 14 sec
Weight: 63.7 lbs

EC2510E

HITACHI EC2510E

Description
• Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover
• Baseplate integrated control panel protects the gauge, regulator and plumbing while centralizing the controls for simple operation
• Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply
• Pneumatic throttle control, that uses air instead of a cable to adjust the throttle, eliminates the common failure of cable throttles due to crimping and breaking
• Full-size 3/8" locking regular comes pre-installed
• Ball valve tank drains makes required tank draining comfortable and convenient

Specifications
Width: 18.1"
CFM @ 100PSI: 9
PSI Range: 116-145
Control Panel: Baseplate
Regulator Size: 3/8"
Oil Level Sight Glass: Oversized
Oil Level Indicator: Sight Glass
Crankcase Breather: Metal
Engine Throttle Control: Pneumatic
Actual Weight: 144 lbs
Length: 42.1"
Height: 24.4"